Easy-Peelzy XL, the easy removal two-part 3D printing platform for large format printers with PLA and PLA-based materials. You can cut it into any smaller size or shapes to fit your printer!
Size is 30 x 30 cm square, or approximately 12 x 12 inches.
To use it, simply stick the bottom plate onto your build plate and start printing, peel up the top plate with finished prints, then peel off the top plate from the prints. Snap the top plate back into place for next round of printing.
Warning: Do not expose Easy-Peelzy XL to heat over 80 °C or 176 °F, or your Easy-Peelzy XL risk demagnetizing! Due to the magnetic nature of Easy-Peelzy, magnetic printer bed leveling sensors might not work with it.
In case you need to remove the bottom plate, slowly peel off the magnetic bottom plate and spray some isopropyl alcohol onto the adhesive residue, use paper towel or cloth to rub them off after 5 minutes.